Do You Need to Detach Your Old Mixer
Removing a shower head when renovating your bathroom to update your bathtub fixtures is something we may all have to eventually do. If your old showerhead is outdated and you want to update it with a more modern energy saving model or your fixture is leaking and needs your immediate attention for removal, don’t panic.
However, if for some reason you are a bit intimidated by the thought of replacing your bathtub hardware, fear no more because this is a do-it-yourself newbie replacement guide that teaches you how to easily remove your existing plumbing installation.
The great thing about removing this fitting when renovating your bath is that there is no need to spend your hard-earned dollars to hire a seasoned plumber to remove the product. All you have to do is follow these few simple diy replacement steps that will cost you next to nothing to get the job done right the first time.
Plumbing Tools Needed for Successful Extraction
This do-it-yourself reference guide is quite basic, but requires a few simple plumbing tools in order to successfully remove your fixture. Take a deep breath, there is no need for anxiety because the equipment required for loosening and removing this type of fitting are everyday household implements that are probably already lying around in your tool box.
Gather the plumbing tools you currently have or make a list of the equipment that you will probably need to purchase at your local home improvement or hardware store and you will be a step closer to rid yourself of that old tarnished dripping nozzle.
Here is what you are going to need to fix your bathware when remodeling your bathing space
• Pipe Wrench
• Channel locks (optional)
• Masking Tape (optional)
• Wire brush (optional)
• Tooth brush (optional)
When replacing a shower head if you are renovating your washroom, keep in mind that some nozzles can be easily unscrewed without the use of any equipment at all. If this is the case, read the following section about safety and by all means use your hands to unscrew the nozzle off the water pipe.
However, this do-it-yourself guide has highlighted a specific set of tools to prepare you in the event that your fixture might be securely fastened to the water intake pipe.
Preparing to Take Out the Nozzle
Depending upon your type of model, before you begin working on the removal of the device, for safety reasons, it would be best for you to find your household’s central switch-box and cut the electricity to the bathroom.
Some modern-day showerheads are directly linked to an electrical system that provides flash heat; by cutting off any electrical power, you will be protecting yourself from any possible mishaps so read the manual that came with your showering unit or go online to the manufactures site and find the appropriate removal instructions.
In the event of an unlikely break in the water pipes when removing the device, it would also be a good idea to similarly shut off your water supply. If the waterline does break, this preventative safety measure could save you from paying a hefty utility bill or unnecessary water damage to your bathroom. Without further ado, let’s get into the actual removal of the showerhead.
Disconnect From the Water Supply
First off, check to see if your showerhead is fastened unto the water supply by small screws. If this is the case, get your screwdriver and begin loosening the screws. If the device is firmly fastened and secured unto the water supply by couplings, this is where the pipe wrench or channel locks come in handy to remove the hardware.
When removing your nozzle , whichever wrench you choose, it is always a good idea to layer the surface of the jaws with masking tape. If the fitting to be removed is old, the tape is not necessary, but if the product is being removed for minor repairs, then the masking tape will prevent any surface damage to the finish of the fixture.
Avoid Damaging the Fixture During Installation
After placing the tape on the jaws of the wrench, begin turning counter-clockwise (this is the direction to loosen the showerhead) and the coupling should be loose with little effort.
With showerhead removal, this is not a job to be done in haste, be patient and extremely careful when loosening the showerhead, for turning the coupling too fast can cause damage to wall-surfaces or even a break in the piping so take your time and apply steady even pressure to remove the device.
The removal of the showerhead is your main objective, but successfully accomplishing the mission needs a little more effort. After the disconnection of the showerhead, use a wire-brush or toothbrush to remove pieces of Teflon tape left behind from the water-supply nozzle that had been previously put in place.
Cleaning the Surface for Your new Low Flow Fixture
Such materials like Teflon are often used to wrap the threaded ends of pipes to reduce friction as well as ensure water tightness. The Teflon should be removed so that a fresh batch may be placed when reattaching your new showerhead.
Now that you have successfully completed this easy do-it-yourself project, any intimidation previously felt towards the disconnection and removal of your shower-head should be long gone. This standard removal guide is solely built for your assistance; this tutorial is basic, to the point and will surely help you to get the job done at little or no cost at all.
Stop wasting time and begin that shower removal job you have been putting off. Remodeling your bathroom with a new fixture is a simple and easy way to spruce up your bathing area with minimal cost to you.
Browse our categories where you can find tutorials on ways to a better bath. Washroom conversion guide. We give you the info to get your bath refitting job done. Successful powder-room trending options and accomplish your mission to find half-bath products and get the latest information on building home interiors online.