Replacing Your Outdated Vessel
Learn the procedure for removing a tub in your bathroom. Are you planning to replace a tired looking bathtub and give new life to your outdated bath? These days, more men and women prefer to do renovations at home not just because they want to save on the service charge of hiring carpenters and plumbers but also because of the sheer fun of doing renos on their own and the pride that comes after completing a successful remodeling project.
Removing a tub in your bath may somehow seem challenging for the inexperienced DIYer but with easy-to-follow instructions on tub removal, anyone can easily retrofit their tub. This article serves as a perfect guide for someone who wants to learn how to remove an old tub in their washroom and replace it with a new soaking basin.
Tools for a Stress Free Refitting
Before replacing your bath fixtures, generally bathroom tub removal would require you to use the right tools to update your old tub easier and more stress-free. So before updating your bathtub, make sure that you have already prepared the following tub removal tools and materials:
• Straight Screwdriver
• Phillips Screwdriver
• Adjustable Wrench
• Cold Chisel
• PVC Joint Cleaner
• PVC Pipe Cutter
Directions to Up grade Your Old Basin:
Before you start removing your bath fixtures, the first thing you have to do is to ensure that the main water supply is shut off. Then you have to gain access to the piping system and check all the drain connections. A small part of the wall may have to be removed in order to do this.
Before you take out your bathtub, what you need to remove next is the surrounding drywall at the sides. After breaking through the desired drywall area with a crowbar, you can now access the wall studs and plumbing. When unscrewing the drain’s pipe, your adjustable wrench will surely come in handy.
Disconnecting the Plumbing
You can also use the same tool in unscrewing all the connections for the waterline from the back portion of the faucet. All the attachments have to be disconnected when you remove the old plumbing.
In removing your old tub, a hammer and chisel will be needed to take out the wall covering or the tiles around it. If your tub is made of acrylic, you can hammer it out into several pieces. However, a tub made of cast iron will require you to use a sledgehammer. You also have to loosen the caulk by using a utility knife to cut the edges for easier tub removal.
The next step is to put a little distance between the wall and the tub using your crowbar then slide it away using the skid. This is the best way to remove a tub.
Now let us move on to replacing your old tub with a new model. For your bathtub replacement, there are several models that you can choose from. Your choices for configurations, sizes and shapes come in a wide variety, so choosing the perfect bathtub that will match your bathroom’s interior will not be much of a problem.
Install the Receptacle Yourself or Hire a Contractor
It is common knowledge that if you hire somebody else to install your new bathtub, it will surely add up the cost of the entire project. If you want to save some of your hard-earned cash, you can replace your bathtub yourself by following this helpful guide.
For the correct way to replace your tub, it is a must to check the backboard thoroughly. After positioning the new tub in your bathroom, make sure that the drain pipes and plumbing are properly aligned. You also have to make sure that the new tub is securely in place and it has no rocking movements.
After leveling the tub, the piping to the water supply and the drain will have to be reconnected. You will also need to reattach the spouts, faucets and drain. And when all connections are already properly installed, you can check for any leakage by turning the water supply back on.
Creating a Watertight Seal
You also need to know how to caulk a tub to complete your tub removal project. To achieve clean lines, you can use painter’s tape as margins along the areas that will require caulking. Then load the caulk gun and pierce the inner bag to release the silicone caulk.
Use your finger to set the caulk on both vertical and horizontal runs. Then take out and discard all the tape. Allow more time for the caulk to set and your new bathroom tub is ready for a good soak.
When considering removing your tub, no matter how limited the space in your bathroom is, you can always find a space saver model that will be suitable for your needs. You don’t have to deprive yourself of the satisfaction that a delightful soak can offer after a long day at work. With these helpful directions, you can effectively install a new tub that will give you all these benefits and more.